$30 SEAAN Egg Incubators for Hatching 10-30 Eggs Automatic Egg Turni Lab Scientific Products Lab Instruments Equipment Heating Cooling Equipment /calendal155582.html,10-30,SEAAN,Eggs,desarrollo.bora-services.com,$30,Lab Scientific Products , Lab Instruments Equipment , Heating Cooling Equipment,Incubators,for,Egg,Hatching,Turni,Egg,Automatic SEAAN Egg Incubators for Colorado Springs Mall Hatching Eggs Turni 10-30 Automatic /calendal155582.html,10-30,SEAAN,Eggs,desarrollo.bora-services.com,$30,Lab Scientific Products , Lab Instruments Equipment , Heating Cooling Equipment,Incubators,for,Egg,Hatching,Turni,Egg,Automatic $30 SEAAN Egg Incubators for Hatching 10-30 Eggs Automatic Egg Turni Lab Scientific Products Lab Instruments Equipment Heating Cooling Equipment SEAAN Egg Incubators for Colorado Springs Mall Hatching Eggs Turni 10-30 Automatic

SEAAN Indefinitely Egg Incubators for Colorado Springs Mall Hatching Eggs Turni 10-30 Automatic

SEAAN Egg Incubators for Hatching 10-30 Eggs Automatic Egg Turni

$30

SEAAN Egg Incubators for Hatching 10-30 Eggs Automatic Egg Turni

|||

Product description

Specification:

Voltage: 110V, 50Hz

Power: ≤45W


Operation Tips:

1. Insert AC110V, the light on the left turns on, and the incubator starts to work (the heater also starts to work);

2. Make sure to fill the water tank with water (150-200ml) before use;

3. Before incubating, preheat the machine for 15-30 minutes. And check whether the set temperature is 38°C. If not, set the temperature to 38°C. Please refer to the button description to set;

4. Check whether the two LED indicators are on during the preheating process;

5. Press the set button for 3s to test the egg turning function (the egg tray is rotating).


Indicator Status Description:

The red light on the left side of the display is used as a heating indicator. When turned on, the machine is heating up.


Note:

1. Before opening the lid, make sure that the power supply is disconnected.

2. The hatched eggs must be breeding eggs.

3. After the incubation is completed, the lid and bottom must be dried separately.

4. The incubator is greatly affected by the environmental temperature. When the environmental temperature is low, the incubator needs to be moved to adapt to the environment or covered with thermal insulation foam during the incubation process.

5. If the ambient temperature of the incubator is relatively high, there is no need to put on the included thermal insulation foam.

6. The humidity of the incubator needs to be controlled by adding water to the inside of the incubator, and the humidity needs to be ensured during the incubation process (take hatching eggs as an example: in the early stage of incubation, the amount of water added in one day is 150-200ml; in the middle stage, 150-200ml in two days; hatching In the later stage, spray water on the eggshell to add water)

SEAAN Egg Incubators for Hatching 10-30 Eggs Automatic Egg Turni

Explore