The injector for sale in this listing has EV1 plug type (minitimer) and delivers 42lbs/hr injector flow rate at PSI 440cc/min . This is high impedance. It has filter basket on top with a four-hole disc fuel delivery nozzle for superior fuel atomization. Please see the specification below for further details:
Body: Metal amp; Composite plastic factory fitted with Viton upper amp; lower O-rings.
Resistance: 14 ohms
Flow Rate in LB per hour: 42 LBS/HR at 43.5 PSI
Flow Rate in CC per minute: 440 CC/min at 43.5 PSI
Pressure: Min 30 PSIG / Max 100 PSIG
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Length: 3 inches, 74 mm
Diameter: 16 mm
O-rings: on both Top and bottom about 14.5 mm
APPLICATION:
These fuel injectors should fit all of the following vehicles, please verify with your local dealer to be sure, the list is provided for reference only!
1992-1998 BMW 318i
1992-1996 BMW 318is
1995-1999 BMW 318ti
1994-1995 BMW 530i
1994-2003 BMW 540i
2004-2005 BMW 545i
2004-2005 BMW 645Ci
2006-2007 BMW 650i
1993-2001 BMW 740i, iL
2002-2005 BMW 745i, Li
2006-2007 BMW 750i, Li
1994-1997 BMW 840Ci
1988-1991 BMW M3
1997-1999 BMW M3
1991-1993 BMW M5
2000-2003 BMW M5
1996-2000 BMW Z3
2000-2003 BMW Z8
2000-2007 BMW X5
2007-2008 BMW Alpina B7
Any BMW models with 8 cylinder engine using Bosch EV1 or EV6 style injectors
Any BMW E30, S14, M10 or other models with 4 cylinder engine using Bosch EV1 style injectors.
1984-1993 Mustang models with 4 cylinder engine
1984-1995 Mustang GT, LX and Cobra with 2.3L and 5.0L engine